Trunk Tracker V Operation Scans APCO 25 Phase 1 and Phase 2, X2-TDMA, Motorola, EDACS, and LTR trunked systems, as well as conventional analog and P25 digital channels. Multi-Site Trunking Lets you program the scanner to share trunked system IDs across multiple sites without duplicating IDs.
Control Channel Only Scanning With Motorola trunking frequencies, you do not have to program voice channel frequencies. Instant Replay Plays back up to 240 seconds (4 minutes) of the most recent transmissions. Audio Recording Capture transmissions for later playback.Encryption Muting - APCO P25 encrypted voice is muted automatically. Custom Alerts You can program your scanner to alert when you receive, a Channel or Unit ID, a Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit.
For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 3 flash patterns. 6 Multicolor LED Alert The alert LED with 7 colors, Blue, Red, Magenta, Green, Cyan, Yellow, or White, can be used with your Custom Alerts. Trunking Discovery Monitors system traffic on a trunked radio system to find unknown IDs and automatically records audio from and logs new channels for later review and identification. Conventional Discovery Searches a range of frequencies to find unknown frequencies and automatically records audio from and logs new channels for later review and identification.Scan by Service Types Scan your channels by Service Type i. Scan Speed - 85 channels per second. (typical) in Search mode (max) except for 5 kHz steps. (typical) in Search mode (max) (Turbo Search) for 5 kHz steps. Multi-Level Display and Keypad light Makes the display and keypad easy to see in dim light with three light levels. Temporary or Permanent Avoid For Systems/Sites/Departments/Channels. System/Channel Number Tagging Number tags allow you to quickly navigate to a specific Favorites List, System, or Channel. Start-up Configuration You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power up the scanner and press the key number, just those Favorites Lists assigned to the key will be enabled for scan. Close Call Do-not-Disturb checks for Close Call activity in between channel reception so active channels are not interrupted. Broadcast Screen Allows the scanner to ignore hits on known broadcast frequencies including pager frequencies in search and Close Call modes. You can also program up to 10 custom frequency ranges that the scanner will ignore. Fire Tone-Out Standby/Tone Search Lets you set the scanner to alert you if a two-tone sequential page is transmitted. You can set up to 32 Tone-Outs.
The scanner will also search and display unknown tones. PC Programming Use the Sentinel software to manage your scanners Profiles, Favorites Lists, Databases, and firmware updates.
Analog and Digital AGC Helps automatically balance the volume level between different radio systems. Priority/Priority w/DND Scan priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions.
Priority ID Scan Allows you to set priority to talkgroup IDs. Individual Channel Volume Offset Allows you to adjust the volume offset for each channel. Repeater Find Allows the scanner to try to switch to the repeater frequency if an input frequency is found. Adjustable Scan/Search Delay/Resume Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search. 7 Data Naming Allows you to name each Favorites List, System, Site, Department, Channel, ID, Location, Custom Search, and SAME group, using up to 64 characters.
Duplicate Input Alert Alerts you if you try to enter a duplicate name or frequency already stored in the scanner. Quick Keys You can assign up to 100 Quick Keys to your Favorites Lists, Systems, Departments, and Sites.
Search Avoids You can temporarily Avoid up to 250 frequencies and permanently Avoid up to 250 frequencies in any Search mode or Close Call mode. 10 Custom Searches Lets you program up to 10 custom search ranges. Search with Scan Operation Lets you include Custom Search ranges during scan operation.3 Search Keys You can assign 3 of the number keys to start a Custom Search, Tone-Out Search, or Close Call Search. Quick Search Allows you to start searching at the displyed frequency or enter a frequency and start searching. SAME Weather Alert/Priority Lets your scanner alert you when a SAME weather alert is transmitted on a NOAA weather channel. You can also set a weather channel as a priority channel.
Built-in Battery Charger Allows you to charge the rechargeable batteries in the scanner from any USB port. The item "RELISTED Uniden BCD436HP HomePatrol Series Digital Handheld Scanner" is in sale since Wednesday, March 25, 2020. This item is in the category "Consumer Electronics\Radio Communication\Scanners". The seller is "ask12b1" and is located in Saskatoon, Saskatchewan.This item can be shipped to North, South, or Latin America.