4 GB microSD card (provided - 1 GB up to 32 GB supported). For storing Favorites Lists, Profiles, all your settings, Discovery sessions, and recording sessions.BCD436HP - located behind the batteries; BCD536HP - located on the the scanner faceplate. Connect to a GPS receiver (not included) for precise system selection and continuing reselection when you travel. The scanner can automatically Avoid and Unavoid Trunked Sites and Departments in Systems based on your current location as provided by an external GPS unit. Lets you set how far out from your current location the scanner will search for channels in Favorites Lists and the database. Location precision for departments and sites that allows you to define a location and range using rectangles instead just of a single circle.
Scans APCO 25 Phase 1 and Phase 2, X2-TDMA, Motorola, EDACS, and LTR trunked systems, as well as conventional analog and P25 digital channels. Multi-Site Trunking Lets you program the scanner to share trunked system IDs across multiple sites without duplicating IDs. With Motorola trunking frequencies, you do not have to program voice channel frequencies. Plays back up to 240 seconds (4 minutes) of the most recent transmissions. Capture transmissions for later playback.
APCO P25 encrypted voice is muted automatically. You can program your scanner to alert when you receive, a Channel or Unit ID, a Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 3 flash patterns. The alert LED with 7 colors, Blue, Red, Magenta, Green, Cyan, Yellow, or White, can be used with your Custom Alerts. Monitors system traffic on a trunked radio system to find unknown IDs and automatically records audio from and logs new channels for later review and identification.
Searches a range of frequencies to find unknown frequencies and automatically records audio from and logs new channels for later review and identification. Scan your channels by Service Type i. (typical) in Search mode (max) except for 5 kHz steps.
(typical) in Search mode (max) (Turbo Search) for 5 kHz steps. Multi-Level Display and Keypad light. Makes the display and keypad easy to see in dim light with three light levels.
Number tags allow you to quickly navigate to a specific Favorites List, System, or Channel. You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power up the scanner and press the key number, just those Favorites Lists assigned to the key will be enabled for scan. Lets you set the scanner so it detects and provides information about nearby radio transmissions. Close Call Do-not-Disturb checks for Close Call activity in between channel reception so active channels are not interrupted.
Allows the scanner to ignore hits on known broadcast frequencies including pager frequencies in search and Close Call modes. You can also program up to 10 custom frequency ranges that the scanner will ignore. Lets you set the scanner to alert you if a two-tone sequential page is transmitted.
You can set up to 32 Tone-Outs. The scanner will also search and display unknown tones.Use the Sentinel software to manage your scanners Profiles, Favorites Lists, Databases, and firmware updates. Helps automatically balance the volume level between different radio systems. Priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions. Allows you to set priority to talkgroup IDs.
Changes the IF used for a selected channel/frequency to help avoid image and other mixer-product interference on a frequency. Allows you to adjust the volume offset for each channel.
Allows the scanner to try to switch to the repeater frequency if an input frequency is found. Set a delay up to 30 seconds or a forced resume up to 10 seconds for each channel or search.Allows you to name each Favorites List, System, Site, Department, Channel, ID, Location, Custom Search, and SAME group, using up to 64 characters. Alerts you if you try to enter a duplicate name or frequency already stored in the scanner. You can assign up to 100 Quick Keys to your Favorites Lists, Systems, Departments, and Sites. You can temporarily Avoid up to 250 frequencies and permanently Avoid up to 250 frequencies in any Search mode or Close Call mode. Lets you program up to 10 custom search ranges. Lets you include Custom Search ranges during scan operation. You can assign 3 of the number keys to start a Custom Search, Tone-Out Search, or Close Call Search. Allows you to start searching at the displyed frequency or enter a frequency and start searching. Lets your scanner alert you when a SAME weather alert is transmitted on a NOAA weather channel. You can also set a weather channel as a priority channel. Allows you to charge the rechargeable batteries in the scanner from any USB port. The DMR upgrade allows users to monitor DMR systems.
The ProVoice upgrade allows users to monitor EDACS ProVoice frequencies. The item "Uniden BCD436HP HomePatrol Series Digital Handheld Scanner With ProVoice And DMR" is in sale since Sunday, May 31, 2020. This item is in the category "Consumer Electronics\Radio Communication\Scanners".
The seller is "winton11" and is located in Fort Wayne, Indiana. This item can be shipped to United States.